Many fashion-forward westerners use handbags as bag products, which can be matched with other dresses, so they are more and more loved by young people, and the demand is large when the use of more, then the lift-up flaps book manufacturer which is of good quality is a matter of great concern to everyone. The following points of experience are summarized for your reference: First of all, you should know that when you are using the lift-up flaps book manufacturer, you must pay attention to using only the same ink. Different types of inks with different properties can not be used together because poor compatibility will affect the quality of the lift-up flaps book manufacturer. Second, avoid direct sunlight and keep the indoor temperature between 10 and 26 degrees Celsius when lifting up flaps book manufacturer. In addition, in the process of lift-up flaps book manufacturer should pay attention to often stir the ink otherwise it is easy to bond directly affecting the quality of the bag, at the same time, but also be careful not to stir too dilute, otherwise there will be color difference. Next, water can better balance the PH value and control the viscosity of the ink during printing. If the PH of the ink exceeds 8.5-9.5, water should be added to adjust the PH value. Also, the lift-up flaps book manufacturer is quite fast. This requires the dryness of the ink to keep up with if the drying of the ink is found to be too slow, you can add an appropriate amount of desiccant to increase the drying speed of the ink, and the ink is not dry. It will be easy to have a bag print dirty and sticky situation.

After completing the lift-up flaps book manufacturer, the printed device must be cleaned. It is worth noting that it must be cleaned when the device is still in a sticky state, so that it can be easily cleaned. If you can't wash it with water, you can add some cleaning agent.

1, in the process of lift-up flaps book manufacturer, pay attention to the use of the same ink, do not mix ink of different nature, if the two can not be dissolved, it will affect the quality of the handbag.

2, in the printing time to ensure the nature of the ink, to avoid direct sunlight, but also to maintain the indoor temperature, is within 10-26 degrees Celsius.

3, in the process of lift-up flaps book manufacturer, if the ink is not regularly stirred, it is easy to bond, which will affect the overall appearance of the handbag.

But also be careful not to dilute too much, so that the printed product will have a color difference, you can add the appropriate thickening agent to adjust.

4, in the process of printing, but also to give full play to the role of water, it can effectively control the viscosity of ink, but also to balance the ph value of the role.

If it is found that the ph value is not controlled between 8.5 and 9.5, water or a PH stabilizer should be added to adjust.

5, the handbag is a high-speed printing, the printing process speed is very fast, so the drying degree of ink also has certain requirements, if the drying speed of the ink is too slow, you can appropriately add desiccant to improve its drying speed, if the ink has not dried the state of printing it is easy to appear the page spent sticky dirty situation, It will also affect the overall printing efficiency.

6, after the printing is completed, the equipment should be cleaned, and the ink on the equipment should be cleaned when the ink is still in a sticky state, so as to improve the cleaning speed, if it can not be cleaned with water, some cleaning agents can be added appropriately.

lift-up flaps book manufacturer https://www.thpkgg.com/Lift-up-flaps-book.html